上海池安实业有限公司|江苏聚安新材料科技有限公司
上海池安实业有限公司
江苏聚安新材料科技有限公司
再生PA6树脂
图文详情
|
项目 Property |
单位 Units |
检测标准 Test Method |
测试条件 Test Conditions |
RBS111 | RBS211 | RBS121 |
|
密度 Density |
g/cm3 | ISO 1183 | 23°C干态 | 1.13 | 1.13 | 1.13 |
|
拉伸强度 Strength at Break |
Mpa | ISO 527 | 23°C干态 | 69 | 65 | 64 |
|
断裂伸长率 Strain at Break |
% | ISO 527 | 23°C 干态 | 25 | 24 | 24 |
|
弯曲强度 Flexural Strength |
Mpa | ISO 178 | 23°C 干态 | 80 | 78 | 78 |
|
弯曲模量 Flexural Modulus |
Gpa | ISO 178 | 23°C 干态 | 2.3 | 2.2 | 2.2 |
|
简支梁缺口 冲击强度 Notched Charpy Impact Strength |
KJ/m2 | ISO 179 | 23°C 干态 | 3.8 | 3.7 | 3.8 |
|
产品简介 Product introduction |
有光,低粘,注塑,改性基料 | 半光,低粘,注塑,改性基料 | 黑色,低粘,注塑,改性基料 | |||
加工条件 / Processing conditions »
![]() |
⼲燥⼯艺
─────────────────
⼲燥温度80-110℃,
⼲燥时间4-6⼩时,
含⽔率≤0.2%
|
注塑温度
─────────────────
熔体温度范围:220-240℃模具温度范围:40-90℃
最佳模具温度:70℃
|
|
Drying process
─────────────────
dry temperature is 80-110℃ ,
drying time is 4-6 hours,
Moisture content is less than
or equal to 0.2%
|
Injection temperature ───────────────── Melt temperature range:220-240℃
Mold temperature range:40-90℃
Optimum mold temperature:70℃
|
上一页
无
下一页





